The CBA represents the clay brick and paver manufacturers of Southern Africa.

We inspire sustainable, contemporary brick architecture and building design in all areas of the built environment: commercial, residential and landscape.

Barbeques, Braais & Firepits

Brick braais are perfect for a large patio. A braai is not a difficult project, and you should be able to complete it in a weekend.


  • Locate the braai where it will be well-ventilated because you will be lighting a fire in it,
  • Leave ample space to the left and right of the braai for tables to place meat and spices, and for traffic in front of it. People love to stand in front of a braai!
  • It should go without saying - build your BBQ a safe distance from anything flammable (including your deck or fence!),
  • Locate the braai where the smoke won’t fill your house or annoy your neighbours.


  • Choose clay bricks that blends in with the surroundings - clay bricks are available in a wide rang eof colours and textures.
  • Ordinary clay brick can withstand heat up to 900 °C, so you don't need special "fire  bricks" or expensive "refractory bricks".
  • Clay bricks are dense, making them great insulators. This gives plenty of nice, even heat to cook on. People and nearby timber structures will be protected by clay masonry walls.
  • Concrete and mortar are poor insulators therefore you must choose fire-resistant mortar. Cement foundations will require a base layer of clay bricks or rocks to protect it from cracking.
  • Never use a concrete brick in a braai, fireplace or firepit. Concrete bricks are dried in the sun, and because they can contain air bubbles they can shatter or even explode when exposed to high temperatures.
  • Painted surfaces cannot withstand high temperatures (even high-temperature engine paints will not withstand the heat of a large fire.  Rather rely on the natural couring of clay bricks to provide an attractive, no-maintenance finish.


  • Brick structures are adaptable in terms of sizing and height, so buy your grill set first and use this to determine the internal width of your brickwork.
  • Build your formation in a rectangular shape to bricklaying easier - structures that are symmetrical are much simpler.


  1. Level the ground before you start building. Dig into the ground at least 10cm. Once level, add a cement foundation and level again. If you do not lay down a foundation for your brick grill, it may become unsettled later from water, heat, and cold. This can cause your bricks to crack, making the whole grill unstable.
  2. As you are constructing the brick layers, use a level to be sure all sides are plumb. Having a side that is lower or higher than the others will cause your project to not only look odd, but it can cause damage later from the pressure or tilt.
  3. Leave 10cm of open space below the grill pan to allow air flow. The charcoal needs to have air flowing around it.
  4. Although you will be tempted to fire up your firepit as soon as it is built, please wait for seven to 10 days for mortar and cement to cure and harden before using. If you have a clay brick fit pit with no mortared joins, you do not need to wait - clay bricks are kiln-fired making them ceramic.